Moment of Fame - Free Online Photo Hosting and Galleries!

Go Back   Moment of Fame > Other Boards > Off Roading


Reply
 
Thread Tools Display Modes
Old 01-05-2007, 08:28 PM   #1
dewers
Junior Member
 
Join Date: Jan 2007
Location: Santa Fe, NM & Torrance, CA
Posts: 9
Default My offroad Toy(ota)

I use this to race in the local offroad series




She does about 80 thru the desert.

Racing and boats, a great way to make a small fortune. Just start with a large fortune
dewers is offline   Reply With Quote
Old 01-06-2007, 12:44 AM   #2
scubapro5
Administrator
 
scubapro5's Avatar
 
Join Date: Sep 2004
Location: Downey,Ca
Posts: 5,137
Default

Quote:
Originally Posted by dewers

Racing and boats, a great way to make a small fortune. Just start with a large fortune
I know what you mean,I use to drag race and now with the boat it gets expensive.

What year Toyota is that and is it a V6 or 4cyl? I use to drag race the older 22R motors.
__________________
Dive Deep and Fish Hard!

Roger


www.momentoffame.com
scubapro5 is offline   Reply With Quote
Old 01-06-2007, 11:55 AM   #3
dewers
Junior Member
 
Join Date: Jan 2007
Location: Santa Fe, NM & Torrance, CA
Posts: 9
Default

It is 22R that has been modified, it puts out around 220HP and has twin mukunis, The stock 5 speed transmission is still in the truck. The rear has 4.88 gears and is totally beefed up to take the abuse. There is 16" of travel in the back and 12" up front.

I still have my drag car, I used to be on the divisinal NHRA trail racing in G/SA and H/SA stock eliminator. I race a 73 340 Duster, that turns 11:30's.
dewers is offline   Reply With Quote
Old 01-06-2007, 03:12 PM   #4
scubapro5
Administrator
 
scubapro5's Avatar
 
Join Date: Sep 2004
Location: Downey,Ca
Posts: 5,137
Default

I have built up many 22R motors from carburated,super charged,turbo and NOS.

I had one motor with twin 50mm mikuni's with NOS but my fasted motor was a intercooled turbo.

Tell me more about your motor

what brand pistons and the compression?

who ported the head?

What size Mikuni's?

What brand header?
__________________
Dive Deep and Fish Hard!

Roger


www.momentoffame.com
scubapro5 is offline   Reply With Quote
Old 01-06-2007, 07:02 PM   #5
dewers
Junior Member
 
Join Date: Jan 2007
Location: Santa Fe, NM & Torrance, CA
Posts: 9
Default

Quote:
Originally Posted by scubapro5
I have built up many 22R motors from carburated,super charged,turbo and NOS.

I had one motor with twin 50mm mikuni's with NOS but my fasted motor was a intercooled turbo.

Tell me more about your motor

what brand pistons and the compression?

who ported the head?

What size Mikuni's?

What brand header?
The pistons are JE, I kept the compression low at 10 to 1 so I can burn regular pump gas. Witht he aluminum head I lose about 1 point of dynamic compression due to heat loss. The heads and all the machine ork was done by LC engineering. The carb's are twin match 44's on a custom built manifod. The header was also custom built
dewers is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -7. The time now is 02:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
California Fishing Forums